NIB

NIB

NIB, Resin Cast by Spec Cast

NIB, box has some wear

original paint is about 90%, replaced steering wheel, could use a cleaning

metal rear rims, nicely restored

near mint, no box

NIB, box has some wear

NIB

NIB

NIB

not marked, but I think this is one of Bill brinkman's too, custom flocked horses, full leather harness, wagon is all wood with plastic wheels, another nice piece; no shipping, local pickup only

barn is 17" long, believe original box, includes some small outbuildings, overall good condition

all NIB and sealed, very high-quality stuff, sells as a set

2 Packages, both NIB, all to go

high-Quality, heavy plastic animals, sells as a family

NIB, hard to find

misprinted, says it's a 1934, but it is a styled A, NIB

NIB

NIB, box has some wear

near mint, no box, could use a cleaning

no box, a little dusty, large set and looks good

near mint, no box, could use cleaning

nice original, TS hubcaps, could use cleaning

nice original, good decals, nice piece

near mint original

near mint, brown paint isn't very brown, 2pc box is nice

nice original, needs a good cleaning

1/25th scale, NIB, still factory sealed

Built by Garth Shyngera of Canada, the 30' straight cut header is made from 18gauge steel and very strong, Auger Flighting, reels, knife bar are construction from 18-gauge steel. All pieces were MIG welded. Cylinders allow the reel to go up and down. Header easily slides into the combine and can be swapped with the corn head. New auger made from steel pipe with extension past eh custom header, all railing, step extension & exhaust are steel, header parts are laser cut 18ga steel, made very well and strong, easy to handle and is shippable

started life as a 915 Ertl Combine, but heavily customized. Under carriage is all brass and is soldered together, header & pickup and feeder is made from Aluminum, Belts are rubber and pulleys are monde on a lathe from steel. Auger is copper and soldered, there are internal sieves and straw walkers made from aluminum. Swings in and out for transport, took 2- winters to build, super detail; unloading auger has slight damage and can be easily fixed. Great piece

might be a mis-matched set, barn is 14"x19", stanchions inside are newer

Not sure on the builder, but believe Carl Meyer, high-quality, 100% scratch built custom, nice piece

plastic, looks good, but needs cleaning

rare old foreign toy, similar to the Chad Valley Fordson, has some play wear, but overall a good original

straight draw bar, high detail, few light paint specs on the hood, NO SHIPPING, Too fragile

NIB

NIB, high detail

NIB

NIB

NIB

Light Plastic, Foreign Made, box is complete, but has some age stains and wear

1950's plastic toy, toy is nice with original lights and stack; the only fault of the toy is the plastic grill inserts have warped and came loose from the grill shell; box is very clean, square and nice, one flap is about 50% torn at the fold, but overall is very nice; very scarce piece, only the second one we have sold and this one is in the best condition

nice, older restoration, could use a cleaning

nice original, near mint, just a little dusty and a little paint loss on the hitch

Large & Impressive, all scratch built from metal, 3' long, 17.5" tall to the top of the cab! Great piece for the 1/8th or Oliver collector!

Great piece, all scratch built and super sharp, would look great behind any 1/8th scale tractor!

Old 190 Bodies restored with custom tandem added, back tractor is a bar grill, front is smooth grill, nicely done with chrome stacks, nice looking & unique

NIB, box has some wear

barn is 20" long, very nice, lots of pieces, neat set

near mint, no box

needs cleaning, otherwise near mint paint

nice original, needs cleaning

near mint, no box, needs cleaning

NIB

NIB

NIB

NIB

NIB

NIB,

NIB, box has some light wear

Large set, base of barn is 22"x9.5", don't know if complete, but includes a lot of pieces, box has some wear

Huge Set, Header is all wood and looks good; Horses with the header all match with full leather harness; Wagon also looks good, comes with 2 Clydesdales with full leather harness, all Breyer pieces; sells as a set for one money; no shipping, too fragile

NIB, high quality steel

heavy plastic animals, all New, sells as a family

NIB, super sharp

1 of 1000 made, 1/16th scale, super detail, seat is broken off but included, includes all the original small parts too

light paint chips on the hood, high detail, no shipping, too fragile

old sand casted custom, a bit crude, don't know maker

front tires replaced, small chip in back right fender, driver might be replaced, overall a great original paint tractor

average repaint, front end has a repair and could use a little more

near mint, no box

NIB

NIB

NIB

about 1/16th scale or larger, made by W. Dumpert of Exter, NE, a little crude, but still unique

Scale Models Tractor with Scratch built 2-row mounted picker, all metal and nicely done, neat piece

100% Scratch built and super sharp, done to 1/8th scale, great piece, over 3' long and 18" tall to the top of the Elevator!

Ertl Toy heavily customized with lights, chains, hubs, levers and more; loader is 100% scratch built from metal and looks good

Ertl Tractor customized with lights, 3pt w/ quick hitch, and more; loader is all scratch built and very sharp

large 1/16th scale, Shelf Model, few light chips and rub marks, no box

missing the seat like most, otherwise just light wear, no box; NO SHIPPING, too frail

not marked, damaged front end, needs work, as-is

old custom, about 1/32nd scale, light wear, no box

believe these are an old Doug Rodgers custom, Ertl L custom painted and wheels changed, looks good

Ertl Toy w/ Ertl Loader custom painted & added, looks good

older repaint, looks good

mint, no box

average repaint, casting is cracking some, stacks replaced

Toys are nice and near mint, box has some tape and general wear, hard set to find

heavy steel, NIB, very nice

heavy steel, mint, no box

lighter plastic, a little bigger than the Little Buster Toys, sells as a set

don't know if complete or not, light cardboard, partially assembled, original box is rough, all to go

Not a Scale Models wagon repainted, but a scratch built from bended steel wagon, very sharp and nicely done

Ertl Toy with lights, levers, steps, 3pt & more added; loader is an Ertl loader added, looks good

NIB, toy is nice, but box is pretty beat up, neat piece

nicely repainted

all NIB, no shipping box, sells as a set for one money

mostly plastic, modern made, mint, no box

good original, one decal is loose on the side, needs a good cleaning, 90% paint

near mint, no box

Mint original, nice piece

old original, missing decals, casting is good, paint is about 85%, hard piece to find

nice original, missing muffler, no box, empty

played with original, plow is a little bent up, paint is about 80% on both pieces, sells as a set

near mint original, muffler is in the cab

original paint is about 75%, front wishbone needs repair, I think it is suppose to have a 3pt hitch, but it is missing

near mint, no box

1/25th scale, NIB, includes the certificate

1/25th scale, NIB, no certificate, signed by Fred Ertl Jr.

1/25th scale, NIB, no certificate or signature, but was purchased with the others

don’t' know if complete, close to 1/16th scale, all to go

older sand casted custom, very nice

mint, no box, hard to find

near mint, large, no motor variation, hard to find

pretty nice original, 80% paint, hard to find, a little smaller than the Arcade variation

paint is about 70%

older stand casted custom, looks good

near mint, correct dark red for a plastic rim tractor, nice enough for a box

both older foreign built toys, both have light wear, 1/16th scale, 2x the money

a little larger than 1/16th scale, mounted to a board to display; comes with a newspaper article about the builder; about as good as you'll ever find for a wood built model! No shipping, too fragile, local pickup only

nice set, 1950's tin litho w/ plastic cattle, barn is 13" long

mint, no box

both nice, no boxes, 2x the money

has been opened and displayed, but never played with, complete, with box

near mint, no box

barn is 17"x9", good original, all to go

NIB

NIB

NIB

NIB

NIB

all nice, no boxes, sells as a set

Resin Cast, 1/16th scale, NIB

Resin Cast, 1/16th scale, NIB

NIB, high detail

older repaint, looks good

played with, 70% paint

average repaint, plastic blades

Ertl Toy customized with lights, levers, 3pt and much more; loader is all scratch built, has the lines, very sharp

NIB

19" long barn, includes a feed carrier, don't know if it is correct for this or not, all to go

pretty good paint, but stacks have been replaced, rims are a little rusty on the inside

missing the backhoe attachment, overall a nice original

Spreader is missing the top bar, otherwise nice, Tractor has had a wood muffler added and some highlight paint, sells as et

nice original, 95% paint

plastic rears, metal front rims, needs cleaning, looks like the wheels have been off and fenders painted

plastic, high detail, near mint, no box

did not test, a little larger than 1/16th scale, unique

nice original, no box

1950's plastic, nice original, nice piece

plastic has turned a little white, overall a nice original

plastic body with wf added and repainted, older custom, looks fine

hard to find, near mint, no box, no shipping

believe it's an old repaint, paint is a little thin, has some wear

nice original, blades are a little rusty

Ertl Toy with tank added and steering arm moved, looks good, haven't seen one before

near mint, no box

High detail, NIB,

High detail, NIB,

NIB

near mint, no box

NIB

built from Ertl IH, looks good

original, paint is about 70%, hard to find

looks to be a mint original, but no decals,

nice original, some light wear, will clean up some

NIB

NIB

NIB

near mint, no box, dusty

NIB, plastic

both nice, no boxes, 2x the money

near mint, old custom, no box

near mint, old custom, no box

front end is damaged, as-is, needs some work

near mint, no box

mint, no box, but has the Styrofoam liner

missing one brass cap to hold the shade on, should be able to get a replacement, otherwise looks good; no shipping, too fragile without the original box

both nice, no boxes, 2x the money

16"x11", has some wear

both look good, one is disassembled, both to go

some old, some new, all to go

all to go

all to go

all pieces look to be reproductions from the originals, all to go

old stuff, all to go

NIB

NIB, still sealed, hard to find

NIB, still sealed, wrapper is torn some

near mint, box is good with light wear

mint, still wrapped in the original plastic from the factory,

mint, still wrapped in the original plastic from the factory,

NIB, still sealed, clean

NIB, still sealed

NIB

has a sticker on the bottom from Howard Karslake Custom Scale Models; body is very similar to a Hubley, but solid cast, unique piece, 1/16th scale

1/16th scale, mint, no box

both nicely repainted, plastic rims, 2x the money

NIB

all to go

all to go

no trailer, head has been poorly repaired, 4.5" long

paint is peeling heavily, needs some work

nice original, needs cleaning

nice original, except missing the top bar, 1950's plastic toy

nicely restored, a little messed up on the hubs

1950's plastic, in part, needs repair

nice original, no box

rates 80% paint

no toys, has the liner, box has some water stains and wear, but overall not that bad

good original, needs cleaning, 90% paint

both nice, no boxes, 2x the money

hard to find variation, near mint, no box

both nice, no boxes, 2x the money

NIB

near mint, no box

near mint, no box

near mint, no box

near mint, no box

both older customs, 2x the money

NIB

NIB

NIB

NIB

NIB

NIB, 1/25th scale

NIB, 1/25th scale